Industrial DR/CT testing

Using a radiation detector to record the intensity of rays transmitted through an object, it can quickly display two-dimensional projection images of its surface and interior (DR detection). At the same time, the real three-dimensional image of the object can be reconstructed through computers using two-dimensional projection images obtained from different angles (CT detection), which can more intuitively and accurately project the surface and internal materials, structures, defects of the object, and the internal composition and assembly of complex assemblies. Currently, with the improvement of manufacturing level and the use of new structural materials, higher requirements are placed on the accuracy, efficiency, and cost of testing. There is no doubt that industrial DR/CT testing is the best solution for non-destructive testing of complex structural products.

& #13;

HTMTAGTOKEN1HTMTAGTOKEN2 Structural Analysis Defective Measurement HTMTAGTOKEN5HTMTAGTOKEN6HTMTAGTOKEN7 & #13; HTMLGTOKEN8HTMTAGTOKEN9HTMTAGTOKEN10HTMTAGTOKEN11HTMTAGTOKEN12 HTMLTAGTAKEN13HTMTAGTAKEN14HTMTAGTOKEN15 is able to visualize the surface of the product and the three-dimensional structure of the internal HTMLGTOKEN16HTMTAGTOKEN17 package Three-dimensional 8HTMTAGTOKEN19HTMTATMTAGTOKEN20 uses three-dimensional data to achieve any point, line 1HTMTAGTOKEN22&13; 3HTMTATLTAKEN24 The geometric structure, material composition and assembly of HTMLTLTAGTOKEN25HTMTATHATMTAKEN26 is capable of measuring the nature of 7HTMTAGTOKEN28 at not HTMLTAGTAKEN29HTMTATHATAGTOKEN30HTMTATHATTAKENTMTAKEN31HTMTATMTATTAKEN32 distribution, 3HTMTATMTATHATAGOTAGOTEN34HTMTATMTATMTATHEN41 is capable of measuring the nature of HTMLTAGTOKTATHTATHEN35, and measuring HTMLTANGLTHEN43 and measuring the complex structure of HTMTATTTATTTATHEN43; (a) HTMLTAGTATHATAGTOKEN47 damage subject to inspection of the subject, HTMLTAGTAKAGTATMTAKEN49 for unknown structures 0 or HTMLGOKEN51HTMTATAGTOKEN52HTMTATAGTOKEN53 micro-synthesis HTMTLTATTATMTATMTATMTATHATTATHA or HTMTATMTAGOTTAKEN62 or any type of analysis directly compared to HTMTATKEN63HTMTATMTATAGTEN64 design HTMTATMTATTENTHEN63 and evaluation of the whole HTMTAGOTTAKTAKOTTMTATMTANTNTTMTANTTATNTTATHL69; HTMLGTOKEN71HTMTAGTOKEN72 consists of a three-dimensional structural analysis.

3 HTMTATMTAGTOKEN 74 HTMTATMTAGTOKEN 75 station

6 HTMTAGTOKEN 77 space or plane pore. Distortion, Euphemism,

8HTMTAGTOKEN79,

0HTMTAGTOKEN81 HTMLGTOKEN82HTMTAGTOKEN83 HTMLGTOKEN84 HTMLGTOKEN85 HTMTAGTOKEN86HTMTAGTOKEN87HTMTAHTMTAGTOKEN88HTMTAGTOKEN89 Simulation of transmission phenomena Structure mechanics Analysis HTMLTAGKEN90HTMTAGTOKEN91HTMTAGTAGTOKEN93 HTMLGTOKEN94HTMTAGTOKEN95 HTMLGTOKEN96 HTMLGKEN97HTMTAGTOKEN (b) 9HTMTATMTAKEN100HTMTATMTATOKEN101 for CT scan data of CTTMTAGTOKEN102HTMTAKEN103 for the 04HTMTATAKEN 105-stream 06HTMTATHAGTOKEN107HTMTATMTAGTOKEN108 for the use of CT Scan data for mechanical parts and components or assembly to use CT Scan 09HTMTATOKEN 110#13; 11 HTMTAGTOKEN112 motion and diffusion simulation 13 HTMTATMTAKEN114 calculates the penetration rate of 15HTMTATOKEN116 on the actual product, meta-analysis assesses stress on the actual product and data availability of 3-D images allows reverse analysis and HTMLGTAGTOKEN117HTMTAGTOKEN118 HTMLGTOKEN119 thermal conductor or diffusion factor, etc. Impact of deficiencies on the reliability of spare parts. Research, and on this basis optimization, to design and produce HTMLGTOKEN 120 New products with functional knowledge of the inspected product, reverse HTMLGTOKEN121 & #13; Design works can significantly reduce the development of new products by HTMLGTOKEN122 Periodicity and cost. HTMLGTOKEN123HTMTAGKEN124HTMTAGTOKEN125